PARAMETER DETAILS:
1.QT-A1:
It is made of high-quality aluminum alloy material, and the matching parts are die-cast in aluminum alloy. Sponge cushioning is used to make the wounded and sick lie comfortably. The folding leg mechanical structure is controlled by the left and right handles. Only one ambulance worker is needed to push the patient into the ambulance. The fixing bracket is fixed to the ambulance, and the stretcher can be locked after boarding the car through the slideway.
Load-bearing capacity 159KG
Net weight: 40KG
Bed height: 90cm (high) 28cm (low)
Backrest adjustment 0-75 degree adjustable
Instructions For Use:
a. Boarding operation; When getting on the train, the upper wheels fully enter the carriage and touch the bottom of the carriage, and push the stretcher cart to the carriage fixture
At this moment, the upper wheel tube of the stretcher and the front locking frame are completely embedded in the fixed seat, and the stretcher car is completely locked on the ambulance.
Operation steps: (1) Upper wheel is close to the bottom of the carriage (2) Push the stretcher cart to the fixed range of the carriage (3) Lock the stretcher cart
b When getting off the car, you need to pull the wrench, so that the car is unlocked, and then the stretcher car is turned outward, and the rear wheel of the car is confirmed to be safe, and then get on the car
The front legs are opened and landed safely, and absolute safety should be ensured when getting off the bus, and do not pull in a hurry to avoid the stretcher truck tipping over.
2. QT-A2:
Technical features:
1. The main material is high-strength, thickened and thickened aluminum alloy for paint surface treatment;
2. Aluminum alloy reversible guardrail is used to facilitate patients to get on and off the stretcher, and is equipped with two safety belts to ensure the safety of patients during transport;
3. The stretcher pad is made of sealed high-density polyethylene coated nylon, concave and convex thickened waterproof to make the patient more comfortable, with a thickness of 100mm;
4. Equipped with a two-stage drip rack with a maximum adjustment length of 75cm;
5. There are two wheels on the bus, and the height of the car is: 64cm;
6. The back of the stretcher surface can be adjusted to make the patient lie comfortably;
7. Wheel size: Ø150mm;
3. QTA3:
Technical features:
The stretcher surface can be separated, and there is a locking device, and the height of the stretcher can be adjusted: 65-85cm
The angle of the backrest is adjusted by a gas spring, and the reversible guardrail in the range 0-659 is protected by the patient during the transfer process. The leg folding mechanism is controlled by the left and right handles. Only one person is needed to push the stretcher into the ambulance. When the stretcher is on the ambulance, it can be locked with a fixture: this stretcher is made of high-strength aluminum alloy material with Ø 150mm wide rubber wheels, mainly used in ambulances, hospitals, emergency centers
PRODUCT PARAMETER:
1. QT-A1:
The highest position :190*55*92CM
THE LOWEST POSITION : 193*55*26CM
Maximum reclination of the backrest : 75°
Carton packing size : 195*62*27cm
Weighing : ≤ 159kg
Net weight : 40kg
Gross weight : 46kg
2. QT-A2:
Unfolded size : 191×57×91CM
Foldable size : 206×57×28CM
Packing size : 207×62×38CM
Weight : 180 kg
Backrest : 0-88° adjustment
Gross weight : 45 kg
Net weight : 40 kg
3.QY-A3:
Waterproof seamless PVC mattress (5cm thickness sponge) 3 seat belts for chest, hip and knee fixations LO1-1 or L06
High position: 195x55x85cm
Low position: 195x55x38cm
Maximum reclination of the backrest: 65°
Maximum knee inclination : 15°
Tare weight: 47kg
Gross weight: 54kg
Load: 180kg
Package size (LxWxH): 199x61x39cm
